Free · Instant · No sign-up

Concrete Cost Calculator for Burlington, NC

Get a quick ballpark for your concrete driveway, patio, slab or walkway based on typical Burlington-area prices. When you're ready, request a free on-site estimate for your exact price.

Estimate Your Concrete Project

Pick your project, enter the size and choose a finish. Your ballpark updates as you go.

1Project type
2Size
3Finish
4Options

Average Concrete Prices in Burlington, NC

Typical installed prices per square foot for a standard 4-inch residential slab in the Burlington and Alamance County area.

Typical installed concrete prices per square foot in Burlington, NC
ProjectBroom finishStampedStained / colored
Driveway$7–$9 / sq ft$12–$19 / sq ft$9–$14 / sq ft
Patio$7–$12 / sq ft$12–$22 / sq ft$9–$17 / sq ft
Slab (garage, shed, pad)$6–$10 / sq ft$11–$20 / sq ft$8–$15 / sq ft
Walkway / sidewalk$8–$14 / sq ft$13–$24 / sq ft$10–$19 / sq ft
  • Removing old concrete: about $3–$6 per sq ft, including haul-away.
  • Thicker slabs: about +10% for 5 inches, +20% for 6 inches.
  • Small projects: typical minimum job charge of about $1,500.

Every site is different. Your exact price comes from a free on-site estimate and a clear written quote.

What Affects Concrete Cost in Burlington, NC

Size and thickness

Bigger projects cost more overall but usually less per square foot. Driveways that carry heavy vehicles may need a thicker, reinforced slab.

Site prep and red clay

Much of Alamance County sits on red clay. Excavation, a compacted stone base and proper drainage add to the price, but they keep the slab from cracking and sinking.

Access to the site

Tight backyards, slopes or no room for a concrete truck can mean pumping or wheelbarrowing the concrete, which adds labor.

Finish and color

A broom finish is the most affordable. Stamped and stained concrete cost more because of extra materials, finishing labor and sealing.

Removing old concrete

Breaking out and hauling away an old slab adds to the cost. If the old concrete is still sound, resurfacing may be a lower-cost option.

Add-ons

Steps, borders, seat walls, fire pit pads and extra reinforcement all add to the total.

Concrete Cost FAQs

How much does a concrete driveway cost in Burlington, NC?

Typical installed prices run about $7–$9 per square foot for a standard 4-inch broom-finish driveway, so a 20×40 two-car driveway (800 sq ft) is roughly $5,600–$7,200. Removing an old driveway, extra thickness or a decorative finish adds to that.

How much does a concrete patio cost in Burlington, NC?

A broom-finish patio typically runs about $7–$12 per square foot, and stamped concrete about $12–$22 per square foot. A 12×16 patio (192 sq ft) with a broom finish is roughly $1,500–$2,300.

Is the calculator result a quote?

No. It's a ballpark based on typical Burlington-area prices. Your exact price depends on your site, access, soil, drainage and design, and comes from a free on-site estimate.

Why does stamped concrete cost more?

Stamping adds color, release agents, stamping mats, extra finishing labor and sealing. That typically adds about $5–$10 per square foot over a standard broom finish.

Is there a minimum charge for small projects?

Yes. Small projects typically have a minimum charge of about $1,500, because bringing out a crew, forms and a concrete truck costs about the same whether the job is large or small.

Do you charge for estimates?

No. On-site estimates are free, and you get a clear written quote before any work starts.

Get Your Exact Concrete Price

A ballpark is a good start. For an exact price, we'll look at your site, measure, talk through your options and give you a clear written quote. It's free, with no pressure.

  • Free on-site estimate
  • Clear written quote with no surprise charges
  • Concrete experience since 1987

Prefer to talk? Call (336) 677-5998.

Get Your Free Concrete Estimate

Takes about a minute. No obligation.

Service needed
Project area (check all that apply)

We'll only use your info to contact you about your project.